I. Product Features:
1. KSD-322 two-component room temperature curing liquid silicone rubber, with solid content of 100%;
2. The curing speed at room temperature is fast, the volatilization is low, it is not corrosive to the material and doesn’t release irritant gas.
II. Typical Applications:
1. Potting protection of electronic appliances, precision instruments and meters, mechanical components, etc.;
2. Moistureproof, insulation and shock absorption protection in other fields.
III. Executive Standard: Q/KSD 011-2018
IV. How to Use:
1. Substrate surface treatment: clean, dry, free of dust and oil stains, etc.
2. Applying glue: mixing components A and B of silicone rubber according to the A/B mass ratio of (10±0.5):1, and slowly pouring into the potting device after uniformly stirring;
3. Curing: Place the potted parts in a ventilated place to allow them to cure naturally. Curing time is about 1 hour (temperature: 25℃ and relative humidity: 55%). If the temperature is too low, the curing time will be prolonged. Before further treatment or packaging the potted device, it is recommended that the user wait long enough so that the bonding fastness and integrity will not be affected.
Special attention: The normal use temperature of glue should not exceed 80℃. if it is used in high temperature environment for a long time, it may expand to different degrees.
V. Packaging Specifications:
Material A: 200L iron drum;Material B: 20L iron drum /200L iron drum.
VI. Storage and Transportation:
1. Store in a cool and dry place for 6 months (below 28℃);
2. This product is non-hazardous and can be transported as general chemicals.
3. The product shall be sealed and stored to avoid extrusion and collision during transportation.
4. Products exceeding the storage period shall be inspected and confirmed to be free from abnormality before use.